Sharp XL-UH3H

E-27
ENGLISH
XL-UH3H
Radio
Listening to the radio (continued)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
 To recall a memorised station
Listening to a cassette tape
3 Within 10 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 10 seconds, press the MEMORY/DISP button to
store that station in memory.
If the "MEMORY" and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorised for that preset channel number will be erased.
Press the PRESET
( or ) button for less than 0.5 seconds to
select the desired station.
MEMORY
Before playback:
z For playback, use normal or low-noise tapes for the
best sound.
(Metal or CrO
2
tapes are not recommended.)
z Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
z Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.