Sharp XV-C1E - Page 18

XV-Cl E
UO.
Adjustment Item
Adjustment Conditions
Adjustment Procedure
19 On-screen
1. Receive the NTSC monoscope pattern
l Turn I2003 so that the display bar
display position
signal.
be well centered on the screen.
check
2. Press the SOUND UP/DOWN keys to
get the sound volume display bar on
the screen.
20 Temperature
1. Press S2001 to call up the ADJ IN
l Check that the numerical entry is 40.
detection level
mode and select the following group.
check
Group: TEMP. SET
18