Do you have a question about the Sharper Image SR410 and is the answer not in the manual?
Connect the Rear Base to the Main Base using the provided bolt, washer, and nut. Connect the sensor wire to the contact wire.
Slide the sensor wire through the poster. Attach the poster to the base console with a bolt and spring washer. Tighten the sleeve cover.
Feed the sensor wire through the upper poster and attach it. Connect the console to the poster and upper poster with a bolt. Tighten the cover.
Feed the sensor wire through the upper poster and place the top cover. Attach the monitor to the monitor support using bolts and washers.
Instructions for removing the battery cover, inserting 2 AA batteries, and replacing the cover. Ensure correct polarity for the LCD screen.
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
This warranty runs for 90 days from the date of original purchase.
This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual.
The Sharper Image will repair any defects in materials or workmanship or replace the product or refund the purchase price.
Return the product and receipt, along with a brief explanation of the problem, to T.S.I. - Returns Department.
| Model | SR410 |
|---|---|
| Brand | Sharper Image |
| Heat Function | Yes |
| Remote Control | Yes |
| Power Source | Electric |
| Massage Functions | Kneading, Rolling |
| Timer | 15 minutes |