7 | P a g e
INTRODUCTION (CONTINUED)
ENGINEERING IMPROVEMENTS
Sheldon Manufacturing continually improves all of its products. As a result, engineering changes
and improvements are made from time to time. Therefore, some changes, modifications, and
improvements may not be covered in this manual. If your unit’s operating characteristics or
appearance differs from those described in this manual, please contact your Shel Lab dealer or
distributor for assistance.
CONTACTING ASSISTANCE
If you are unable to resolve a technical issue with the BACTRON, please contact Sheldon
Technical Support. Phone hours for Sheldon Technical Support are 6am – 4:30pm Pacific Coast
Time (west coast of the United States, UTC -8).
Please have the following information ready when calling or emailing Technical Support: the model
number and the serial number. These will be found on the unit data plate, which is located in the
workspace chamber above the inner pass box door. See page 12.
EMAIL: tech@shellab.com PHONE: 1-800-322-4897 extension 4 or (503) 640-3000 FAX: (503)
640-1366
Sheldon Manufacturing INC.
P.O. Box 627
Cornelius, OR 97113
To Next Page
Loading...