ShelterLogic MaxAP 3-in-1 User Manual

05_23532_29532_0FPage 1
DESCRIPTION MODEL #
3-in-1 MaxAP
™ 10' x 20' Canopy - 8 Leg - White
Plus Enclosure & Extension Kits
23532 or 29532
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
1-800-524-9970
1-800-559-6175
Canada:
RECOMMENDED TOOLS
12/30/11
Canopy - Pgs 1-5
Extension Kit - Pgs 9-11Enclosure Kit - Pgs 6-8
10' x 20'
3-in-1 MaxAP
™
Canopy + Enclosure & Extension Kits
Assembly Instructions
Before you start: 2 or more individuals recommended for assembly, approximate time 3 hours.
Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.
THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

ShelterLogic MaxAP 3-in-1 Specifications

General

UV Protection	Yes
Type	Canopy
Material	Polyethylene
Frame	Steel
Water Resistance	Water-resistant
Setup Type	Pop-up
Use Cases	Camping, backyard

Summary

Canopy Assembly Instructions

Canopy Assembly Safety & Preparation

Important safety guidelines and preparation steps before starting canopy assembly.

Important Safety and Care Information

General Product Warnings and Dangers

Frame Anchoring Responsibility and Disclaimer

Details consumer responsibility for proper frame anchoring and liability.

Canopy Roof Frame Assembly

Lay Out Canopy Roof Frame Components

Assemble the Canopy Roof Frame

Step-by-step instructions for assembling the main roof structure.

Assemble and Attach Canopy Leg Poles

Guidance on assembling the leg poles and connecting them to the roof frame.

Secure the Canopy Frame with Anchors

Instructions for anchoring the assembled canopy frame to the ground for stability.

Place and Secure the Canopy Cover

Steps for positioning and initially securing the main canopy cover onto the frame.

Tighten Canopy Cover Using Twist Tite™

Final tightening procedure for the canopy cover using the Twist Tite™ system.

Enclosure Kit Assembly Instructions

Attach Enclosure Side Walls to Frame

Enclosure Panel Attachment Safety Notes

Attach Enclosure End and Zipper Door Panels

Tighten Enclosure Cover with Twist Tite™

Extension Kit Assembly Instructions

Attach Extension Side Walls to Frame

Assemble Extension Panel Tent Poles

Raise and Attach Extension Tent Poles

Anchoring and Rope Toggles for Extension

Instructions for anchoring the extension using guy ropes and toggles.

Tighten Extension Cover with Clamp Twist Tite™