SHERCO 290 ST User Manual

144
ST SERIES
CARBURETTOR AND REED BLOCK
- Remove the rubber cap and cover from
the throttle grip and release the cable.
- Open the cover and remove the air
fi lter. Loosen the 2 screws fastening
the fi lter box and the 3 screws from
the rear mudguard.
- Remove the CDI and the clamps
securing the carburettor to the inlet
nozzles and fi lter.
- Close the fuel petcock valve. Remove
the carburettor towards one side and
dismantle the draining tube.

SHERCO 290 ST Specifications

General

Brand	SHERCO
Model	290 ST
Category	Motorcycle
Language	English