SHERCO 290 ST User Manual

171
ENGLISH
CLUTCH DISCS
❱❘
PARTS BREAKDOWN
- First remove the brake pedal. Loosen
and remove the clutch cover screws.
- Loosen the clutch spring screws.
- Remove the spring-bearing plate. - Pay
attention to the position of the washer.
- Using a calliper gauge, check the wear
and tear of the disc lining, max 2.6mm,
min 2.4mm.
- Pay attention to how the discs are placed
when reassembling and tightening the
disc assembly.

SHERCO 290 ST Specifications

General

Brand	SHERCO
Model	290 ST
Category	Motorcycle
Language	English