SHERCO 290 ST User Manual

170
ST SERIES
IGNITION
- When replacing the stator, pay special
attention to positioning and aligning the
pick-up before tightening the fastening
screws.
- Once the fl ywheel has been replaced,
impregnate the nut with Loctite 243
fastener and set the dynamometer to
100NM.
- Before replacing the cover, make sure
the o-ring seal has been correctly
placed on the cover.
- Replace the ignition cover.
❱❘
PARTS BREAKDOWN

SHERCO 290 ST Specifications

General

Brand	SHERCO
Model	290 ST
Category	Motorcycle
Language	English