SHERCO 290 ST User Manual

140
ST SERIES
CHANGING LEFT SUSPENSION BAR SEAL
- Before fi xing the bar on the screw,
use protective material to prevent
scratching.
- Loosen the plug and remove it
completely.
- Remove both tapered separators.
- Remove the washer and the spring
slowly to avoid splashing oil.
- Place all the elements on a clean surface
and empty the oil into a container.
- Secure the protected bottle and loosen
the pumping die to be able to remove
the oil-retaining washer and screw.

SHERCO 290 ST Specifications

General

Brand	SHERCO
Model	290 ST
Category	Motorcycle
Language	English