175
ENGLISH
GEAR SELECTOR
- Loosen and remove the radiator.
- Loosen and remove the cooling circuit
draining screw.
- Have a receptacle ready to collect the
fl uid. Empty the cooling fl uid from the
engine.
- Replace and close the draining screw.
- Loosen and remove the gear-shift lever.
- Empty the oil from the engine carter.
- Dismantle the starter pedal.
- Loosen the screws from the engine's
right-hand semi-carter. Remove the
semi-carter, including its cover.
- Loosen the clutch spring screws.
- After removing the cover with the
springs, remove the clutch peg and
rod.
To Next Page
Loading...
Need help?
General
