50 SE-SM
Operating the vehicle
n MEASURING THE DIAMETER
OF THE WHEELS
n BATTERY
- Method 1
Multiply the outer diameter of the wheel by
3.14 to find its circumference. The value
found (in millimeters) is the value to use
for the configuration of your wheel.
Note: If you measure the diameter in
inches multiply the diameter by 25.4
to convert it to millimeters.
- Method 2
On a flat surface, mark a spot on
your tire and the ground with a marker or
chalk. Rotate the wheel until it has
made a complete revolution. Mark the floor
at this new position. The distance separating
the two marks is the value to use for the
configuration of your wheel.
Battery type: CR2032
Circumference = wheel diameter (mm) x 3.14
70
To Next Page
Loading...
Need help?
General
