Shimadzu GC-8A Series User Manual

9
GC-8AIE
Column Oven
Temperature range
Temperature control
Temperature control accuracy
Temperature
Readout (Monitor)
Heating speed
Cooling speed
Column
Overheat Protection
: Room temperature to 399°C
: Proportional-integration type of zero cross
switching system
: ±0.1°C
: When the temperatures of the column
oven and the injection port/detector have
reached the set points, the respective
READY lamps are lit.
:
From room temperature to 350°C in 13 minutes.
: From 350°C to 100°C in 3.5 minutes.
: Stainless steel: 12m x 1
Glass: 5.4m x 1
: Two-stage protection:
(1) If the temperature exceeds the
programmed (preset) temperature by 50°C,
the heater will be automatically turned off.
(2) If the temperature reaches about 420°C,
the heater will be automatically turned off.
Temperature of Injection Port/Detector
Temperature range
Temperature control
Temperature control accuracy
Temperature
Readout (Monitor)
Overheat Protection
Injection Port
: Room temperature to 350°C (10°C steps)
: Proportional-integration type of zero cross
switching system
: ±0.1°C
: When the temperatures of the column
oven and the injection port/detector have
reached the set points, the respective
READY lamps are lit.
: If the temperature reaches about 350°C,
the heater will be automatically turned off.
: On-column injection ports
Flow Control
Carrier gas One pressure regulator
One column inlet pressure gauge
Electron Capture Detector (ECD)
Detector
Radiation source
Detection limit
Dynamic range
Maximum temperature
Standing current
: Coaxial type cell and purge flow line
:
63
Ni 370MBq
: 0.2pg/s for Υ-BHC
: 10
4
: 350°C
: 0.5, 1.0, 2.0mA
Others
Dimensions
Weight
Power Requirements
Other
: 440W x 405D x 435Hmm
: 26.0kg
: AC100/115V or 220V as ordered.
1500VA max. 50/60Hz.
: Column oven heating starts after the
injection port / detector reaches the set
temperature.

Shimadzu GC-8A Series Specifications

General

Brand	Shimadzu
Model	GC-8A Series
Category	Laboratory Equipment
Language	English