Shimadzu LC-20 User Manual

Clarity Controls
Shimadzu LC-10/20 System
LC + DET + AS + CO ENG
Code/Rev.: M108/70B
Date: 11/30/2016
Phone: +420 251 013 400 DataApex Ltd.
Fax: +420 251 013 401 Petrzilkova 2583/13
clarity@dataapex.com 158 00 Prague 5
www.dataapex.com The Czech Republic

Shimadzu LC-20 Specifications

General

Brand	Shimadzu
Model	LC-20
Category	Laboratory Equipment
Language	English

Summary

Shimadzu LC-10/20 System Overview

System Requirements

Minimal Firmware Versions

Specifies minimum firmware versions for compatible system devices.

Installation and Configuration

System Communication Setup

Details serial and LAN connection methods for system communication.

Software Installation

Guides the user through the Clarity software installation process.

Clarity Configuration

Explains how to configure the system within the Clarity software interface.

Shimadzu System Setup

Details the setup and configuration parameters for the Shimadzu LC-10/20 system.

Using the Control Module

Pump Setup and Operation

Details the configuration and operational parameters for the pump module.

Detector Setup and Operation

Guides on configuring and using various detector types for analysis.

Autosampler Setup and Operation

Explains the setup and operational procedures for the autosampler.

PDA Detector Setup

Covers the setup and operational parameters for the PDA detector.

Thermostat Setup and Operation

Details the configuration and operation of the thermostat module.

Troubleshooting

Vial Plate Numbers