Need help?Do you have a question about the Shimadzu GC-2014 Series and is the answer not in the manual?
General| Type | Gas Chromatograph |
|---|---|
| Detector Options | FID, TCD, ECD, FPD, FTD |
| Display | LCD |
| Injection Ports | Up to 3 |
| Column Options | Capillary, Packed |
| Data System | GCsolution software |
| Weight | Approx. 45 kg |
| Number of Detectors | Up to 4 detectors |
| Injection Port | Split/Splitless |
| Power Requirements | 100-240V AC, 50/60Hz |
Covers required physical space, environmental conditions, and precautionary items.
Details specified voltage ranges and power capacity needed for the instrument.
Outlines gas purity specifications and supply pressure for proper operation.
Provides assembly configuration charts for various GC-2014 models and their components.
Details the external appearance and internal component diagrams of the GC-2014.
Presents block diagrams and circuit schematics for the instrument's electronic systems.
Shows assembly configuration charts for AFC, Manual Flow Controller, and APC types.
Illustrates the gas flow paths for different injection modes.
Details assembly configuration charts for SPL and WBI injection units.
Explains piping configurations, component diagrams, and heater resistance values.
Lists parts and shows assembly diagrams for the Packed Dual Injector.
Shows parts list and diagram for the Thermal Conductivity Detector (TCD).
Details parts list and diagram for the Flame Ionization Detector (FID).
Illustrates the Electron Capture Detector (ECD) setup and components.
Provides assembly diagrams and parts for the Flame Photometric Detector (FPD).
Details assembly diagrams and parts for the Flame Thermionic Detector (FTD).
Lists part numbers and names for the main GC-2014 unit.
Lists parts for FID, FPD, FTD, ECD, and TCD detectors.
Lists parts for Dual Injector and miscellaneous items like AFC and power supply.
Addresses issues with flow rate control settings for CAR and DetAPC.
Covers temperature control issues and detector-specific problems (FID, FPD, FTD).
Troubleshoots problems with peak output, data format, and signal types.
Addresses miscellaneous issues like display problems and connection errors.
Explains flow rate adjustment, mode settings, and system parameters.
Covers serial number management, maintenance logs, and unit usage times.
Describes the initialization for shipment window and other special functions.
Provides a step-by-step guide for upgrading the GC-2014's firmware via RS-232C.
To Next Page