Need help?Do you have a question about the Shimadzu GCMS-QP2020 and is the answer not in the manual?
General| Scan Speed | 20, 000 u/sec |
|---|---|
| Ionization Method | EI (Electron Ionization) |
| Data Acquisition | SIM/Scan |
| Ion Source Temperature | 100 to 300 °C |
| Vacuum System | Dual Stage Rotary Pump |
| Resolution | Unit mass resolution |
Details the physical properties, combustion range, and ignition characteristics of hydrogen gas.
Ensures safe installation by emphasizing ventilation and avoiding ignition sources.
Guidelines for safe operation, including checks, static discharge, and gas concentration monitoring.
Safety measures for maintenance, leak checks, alarm device calibration, and shutdown.
Safe handling and setup of high-pressure hydrogen gas cylinders.
Identifies risks like ignition from accumulated hydrogen in GC oven, MS, or leaks.
Step-by-step guide for starting up and operating the GCMS with hydrogen as carrier gas.
Explains scenarios leading to hydrogen accumulation inside the MS and associated risks.
Critical steps to take during a power outage to prevent hydrogen gas hazards.
To Next Page