Chapter 8 Service Window
GC-2014 Service Manual
113
8.6 Serial Number
8.6.1 Main Body Serial Number
The type of character can be changed using the pf2 and pf3
keys. The pf2 key is used to switch between alphabetical
and numerical characters, and the pf3 key is used to switch
between u
er and lower case.
Up to 20 characters can be input.
The unit serial number is input before shipment. This
information is shown on self-diagnostic reports. If, for some
reason, the serial number does not appear, it can be input
from this window.
To Next Page
Loading...
