Shimadzu LC-20 User Manual

Shimadzu LC-10/20 System 4 Using the control module
4.4.5 Report Setup
All PDA detector settings accessible on the Shimadzu LC-10/20 System
Setup - PDA tab, in the Method Setup - Acquisition tab for the PDA signals
and settings from the Method Setup - PDA tab are reported if the
Instrument Control parameter on the Method tab of the Report Setup
dialog is checked. For each detector set in the Shimadzu LC- 10/20
System Setup dialog, a specific section of the report will be printed, as
well as dedicated section for common PDA parameters.
Fig 48: Report Setup
- 64 -

Shimadzu LC-20 Specifications

General

Brand	Shimadzu
Model	LC-20
Category	Laboratory Equipment
Language	English