Shimadzu TOC-V CPH - Measurement Monitoring

TOCV-CP_IMshort_Control-ver-2_Rev07F Page 21 of 22
(Software version ≥ 2.00) effective date: September 2007
3 Sample Window - During Measurement
- Click the [Sample Window] button on the Tool bar
Parameters
Action/Description
Graph
Current Peak
All Peaks
Calibration Curve
Displays the peak profile of the highlighted injection.
Displays all injection peaks for the selected sample
Displays calibration curve (for calibration standards only)
This function is not available during real-time analysis.
Parameter Table
Displays the sample parameter of measured sample
Injection Table
Displays the result of the injection