Shimadzu TOC-V CPH - Online Manual and Administration; Online Manual Access; Administration and Security

TOCV-CP_IMshort_Control-ver-2_Rev07F Page 5 of 22
(Software version ≥ 2.00) effective date: September 2007
Instrument Setup Wizard-5 : SSM parameters
Parameter
Action / Description
SSM TC Furnace ON
Select this option to heat the TC furnace of SSM
SSM IC Furnace ON
Select this option to heat the IC furnace of SSM
Instrument Setup Wizard-6 : Communication parameters
Parameter
Action / Description
Com Port
Select the communication port
Stop Bits and Parity
Cannot be edited by the user .
[determined by the hardware, automatically set based on Com Port]
[Finish] Button
The system configuration is created and the newly created system
configuration is displayed as an icon in the H/W Setting List
window.
1.2.2 H/W Setting List
- to view or modify instrument parameters of already defined systems
Parameter
Action / Description
Open
Select the “Instrument/System” icon and press “Open” to open the
instrument properties
Delete
Select the “Instrument/System” icon and press “Delete” to delete the
instrument system
Close
Press “Close” to close the H/W Setting List window.
1.3. Online Manual
- to open the user manual as PDF format
2 Administration