Shimano Steps DU-E6001 - BATTERY INSTALLATION AND REMOVAL; Installation of the battery

Installation
Mounting the magnet
19
 Mounting the magnet
Magnet mounting position
Mount the magnet so that its center is aligned
over the apex of the triangle symbol.
How to mount the magnet
1
Align the speed sensor (A) and magnet
unit (B) as shown in the illustration.
(A)
(C)
(B)
(A) Speed sensor
(B) Magnet unit
(C) Spoke
2
Tighten the mounting screw (D) with a
screwdriver.
(D)
(D) Mounting screw
Tightening torque:
1.5 - 2 N·m
{14 - 17 in. lbs.}