Shimano Steps EC-E6002 - Travel Data Display; Switching Display (SC-E7000)

39
Installation/removal
Installing the battery mount
(2) Adjust the location of the key unit so that the contact surface of TL-BME03 will be
pushed against the lower case as shown in the figure.
* Be careful not to apply excessive force.
Protrusion
Key unit
Section A Section B
Battery
connection unit
Clearance between section A and section B: 347.2 mm
Contact
surface
Battery
connection unit
(Reference dimension)
6. Tighten the key unit mounting screws.
(1) Tighten the key unit mounting screws.