Shimano Steps EC-E6002 - Battery Charging Procedures; Charging Removed Batteries

14
Charging the battery that removed from the bicycle
BT-E6000/BT-E6001/BT-E6010
Adapter (SM-BTE60) is necessary to charge BT-E6000/BT-E6001/BT-E6010 when removed from the bicycle.
1. Attach the adapter to the charging plug.
2. Connect the charger’s power plug to the outlet.
3. Connect the adapter to the battery’s charging port.
Battery
Battery
Charging port
Charging port
Adapter SM-BTE60
<sold separetely>
Charging
plug
Adapter SM-BTE60
<sold separetely>
Charging
plug
Charging
plug
Adapter SM-BTE60
<sold separetely>
< BT-E6000/BT-E6001 >
< BT-E6010 >