What does error E014 mean on Shimano Steps Bicycle Accessories?
If you see error E014 on your Shimano Steps Bicycle Accessories, the speed sensor may have been installed in the wrong position. Contact the place of purchase or bicycle dealer.
What does error E013 mean on Shimano Steps SC-E6000 Bicycle Accessories?
If you see error E013 on your Shimano Steps Bicycle Accessories, an anomaly was detected in the drive unit’s firmware. Contact the place of purchase or bicycle dealer.
What does W031 error mean on Shimano Steps SC-E6000 Bicycle Accessories?
If you encounter error W031 on your Shimano Steps Bicycle Accessories, the chain tension may not have been adjusted, or the crank may have been installed in the wrong position. Contact the place of purchase or bicycle dealer.
What does E030 error mean on Shimano Steps SC-E6000 Bicycle Accessories?
If you see error E030 on your Shimano Steps Bicycle Accessories, a setting error was detected. If the situation does not improve even after pressing the battery power button and turning on the power again, contact the place of purchase.
What does error E022 mean on Shimano Steps SC-E6000 Bicycle Accessories?
If you see error E022 on your Shimano Steps Bicycle Accessories, the battery connected to the drive unit does not conform with system standards. Contact your place of purchase or a local bicycle dealer for assistance.
What does error E021 mean on Shimano Steps SC-E6000?
If you see error E021 on your Shimano Steps Bicycle Accessories, the battery connected to the drive unit conforms with system standards but is not supported. Contact your place of purchase or a local bicycle dealer for assistance.
Why is my Shimano Steps SC-E6000 Bicycle Accessories cycle computer not displayed?
If your Shimano Steps Bicycle Accessories cycle computer isn't displaying when you press the battery power button, consider the following: * Recharge the battery if the charge is insufficient. * Ensure the power is turned on by holding down the power button. * The power cannot be turned on while the battery is charging, so stop charging. * Ensure the cycle computer is correctly installed to the bracket. * Check if the connector of the electric wire connecting the motor unit to drive unit is not disconnected. If the issue persists, a component that the system cannot identify may be connected, or you may need to contact the place of purchase.
What does W010 error mean on Shimano Steps SC-E6000?
If you see error W010 on your Shimano Steps Bicycle Accessories, it means the temperature of the drive unit is high. Stop using the assist function until the temperature of the drive unit drops. If the situation does not improve, contact the place of purchase.
What to do if Shimano Steps Bicycle Accessories shows security authentication error?
If you are experiencing a security authentication error with your Shimano Steps Bicycle Accessories, connect a genuine battery and drive unit. Also, check the condition of the cables. If the situation does not improve, contact the place of purchase.
How to update firmware on Shimano Steps Bicycle Accessories to fix E033 error?
If your Shimano Steps Bicycle Accessories is displaying error E033, it means the current firmware is not compatible with the system. To resolve this, connect to E-TUBE PROJECT and update the firmware for all units to the latest version.
Provides guidelines to ensure user safety when operating the system.
Provides detailed safety advice and warnings for battery handling and usage.
Lists detailed technical data including operating temperatures, battery type, and power ratings.
Provides essential safety warnings and procedures for charging the battery.
Provides guidelines for optimal battery charging and storage for longevity.
Step-by-step instructions for securely installing the battery into its mount.
Provides instructions on how to select different assist modes using the switches.
Guides on how to switch between automatic and manual gear shifting modes.
Lists common error indications shown by battery LED lamps and their remedies.
General| Display Type | LCD |
|---|---|
| Battery Level Indicator | Yes |
| Nominal Voltage | 36V |
| Maximum Power Output | 250W |
| Assist Modes | Eco |
| Position | Handlebar |
| Mounting | Handlebar |
| Functions | Speed, distance, battery level |
| Compatibility | Shimano STEPS system |
To Next Page
