11
3.
Select your preferred assist mode.
The bicycle is equipped with either SC-E7000 or EW-EN100.
*
When the power is turned on, assist mode is set to [OFF].
Press button
*
To change to the [WALK] assist mode, it is
necessary to operate the above assist switch.
LED lamp (inner side)
Button
< SC-E7000 >
< EW-EN100 >
OFF
Lit in light blue
Lit in green
Lit in yellow
OFF
[OFF]
[ECO]
[TRAIL]
[BOOST]
[OFF]
LED lamp (inner side) indications Assist mode
[WALK]
Long press Y
Short press X
X
[BOOST]
[TRAIL]
[ECO]
[OFF]
Y
Assist mode
display
X
Y
4.
Ride the bicycle.
Assist will start when you start pedaling.
CAUTION
Before riding, please check the brake system of your bicycle and
how to operate it beforehand.
5.
Turn off the power.
Assist
Start
To Next Page
Loading...
