SHIMGE SHF - User Manual

Vortex Type Micro Clean Water Pump
Models: SHF(m)、CP(m)、PRm、SGA(m)、PX(m)、PUM、
2SGP(m)、SGT、KSW、PC、CPH、ZDK
Mini-type Clean-water Centrifugal Electric Pump
SERVICE MANUAL

Summary

Safety Precautions

Electrical Safety and Grounding

Ensures correct electrical connection and grounding for safe pump operation.

Operational Safety Guidelines

Prohibited Liquids and Environmental Safety

Details liquids that cannot be pumped and environmental conditions to avoid.

Winter Anti-freezing Precautions

Recommendations for preventing frost damage during cold weather operations.

Product Introduction

Operating Conditions

Structure Diagram - PUM, CPm, PC, ZDK

Structure Diagram - PX(m)

Structure Diagram - SGA(m), SHF(m)

Structure Diagram - 2 SGP(m)

Structure Diagram - SGT

Structure Diagram - KSW

Structure Diagram - CPH

Structure Diagram - PRm

Pump Wiring Diagram

Installation Diagram

Instructions for Installation

Pre-Installation Checks and Pipe Connections

Guidance on initial checks, pipe connection, strainer placement, and suction lift.

Initial Priming and Installation Site

Instructions for initial priming, selecting a suitable installation site, and drainage.

Operational Adjustments and Test Runs

Procedures for adjusting pressure switches, safe test runs, and motor direction verification.

Maintenance

Routine Checks and Long-Term Storage

Guidelines for routine checks, safe maintenance practices, and seasonal storage.

Troubleshooting

SHIMGE SHF Specifications

General

Model	SHF
Max Flow Rate	50 L/min
Voltage	220V - 240V
Frequency	50 Hz
Inlet/Outlet Size	1 inch
Material	Cast iron