Warning and Caution
B
Safety Instructions
During each stage of operation of this instrument, please always observe the
following safety instructions. Not taking any safety precautions or following the
instructions will violate the safety standards of design, manufacturing and
application of these instruments. In no case will Shineway Technologies bear the
responsibilities for consequences incurred by violation of the following
instructions.
General
This product is a Safety Class 3 instrument. The protective features of this
product may be impaired if it is used in a manner not specified in the operation
instrument.
Environmental Conditions
It is designed to operate at a maximum relative humidity of 95% and at altitudes
of up to 5000 meters. For more details, please refer to the specifications tables.
Before Applying Power
Verify that the product is set to match the available line voltage, the correct fuse
is installed, and all safety precautions are taken. Note the instrument’s external
markings described under Symbols.
Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable gases or fumes.
Do Not Remove the Instrument Cover
Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made only by qualified service
personnel.
To Next Page
Loading...