Shining 3D Freescan Combo - Laser Mode Navigation and Settings; Navigation Bar Functions (Laser Mode); Settings and Feedback

Description
o
fflin
e.
Click to reconnect when the device is
offline。
●Calibration: Click it to calibrate.
●Scan Mode: Choose the scan mode.
●Scan: Go into scan process.
●Post Processing: Go into post processing after
generate point cloud, which includes mesh and
mesh editing.
●Measurement: To measure your model.
2 Settings and
Feedback
●Reverse Engineering Service
●Link
- Official Website: Open the official website of
Shining 3D to learn about the company’s
products and information.
-Facebook: Enter Shining 3D’s Facebook to view
product introduction and other operations.
- Support Platform: Enter Shining 3D’s support
platform to view product introduction and other
operations.
●Settings
- Advanced Mode: Check the box to select a
smaller dot pitch when creating a new project
1
.
- User Experience: To help us improve the user
experience. We hope to be allowed to collect
usage experience information and we will .
- Factory Default: All settings can be restored to
the initial settings, and the software will restart
automatically.
- Language: To set the language displayed in the
software.
- About: View related software release
information, contact information, etc.
●Help
- User Manual: Open the user manual.