Method One: Click Open project group
after selecting the scan mode.
Method Two: Click and select Open
project group on the scanning page.
In the prompt window, select the project
group file and then click open.
Note
● The current project group will be saved
automatically when opening a project
group.
● Only the project group scanned in the same scan mode can be opened.
Project
Each project is a part of the project group. All operations of project can be done by the
following buttons.
Icon Function Description Note & Warning
Icon Function Description Note & Warning
New Project Two ways to
create a project:
1. A project will be
created
automatically after
click New project
group.
2.Click to
create a new
project on the
scanning
interface.
Note
● The project only can be
created when the scanner is
connected.
●The last project in the
project list is the current
project. Only the current
project can continue to scan,
and you can double-click
different projects to switch.
Open Project Two ways to open
th j t
Note
C t th j t
To Next Page
Loading...
