The object view will be locked during scanning and will not follow the scanning path, when
the function is enabled.
Preview / Start Scan / Pause Scan
You can switch in these 3 status with the trigger on the scanner, or click the button in the
software. The normal order is: Preview -- Scan -- Pause
Function Icon Instruction
Preview Preview and adjust the scan parameters for better
scannning effects.
Start Scan
Click to scan. During scanning, keep the scanner
perpendicular to the surface, keep a proper distance
from the object, and adjust the brightness depending on
the ambient light or texture of the object.
Pause
Scan
edit the scan data or change the view angle after
pausing.
To Next Page
Loading...
