Shining 3D Freescan Combo - Saving Scanned Data

Measurement Description Steps
Distance Calculate the distance
between two points on the
surface of the model.
● Total is the 3D distance.
● X, Y and Z are the
projection of the segment to
the respective planes.
Click on the surface of the model to
pick two points, the calculation will be
done automatically.
Surface Area Calculate the surface area
value.
● Press Shift + left mouse
button(LMB) and move the cursor to
select an area
● Press Ctrl + left mouse
button(LMB) and move the cursor to
unselect.
● Ctrl + A to select all.
● Press Ctrl + C to deselect all the
date.
Volume Calculate the volume of the
watertight data.
It returns the volume in mm³ and the
coordinates of the bounding box.
Note:
Only available for watertight mesh.
Save Data
You can save the scanned data.
Click to select the save path and the file format, enter the file name as well.