1
INSTRUCTION MANUAL
Micro-computer based digital indicating controller JCS-33A
JCS31JE1 2007.09
To prevent accidents arising from the misuse of this controller, please ensure the operator receives this manual.
SAFETY PRECAUTIONS
• To ensure safe and correct use, thoroughly read and understand this manual before using this instrument.
• This instrument is intended to be used for industrial machinery, machine tools and measuring equipment. Verify correct
usage after consulting purpose of use with our agency or main office. (Never use this instrument for medical purposes
with which human lives are involved.)
• External protection devices such as protection equipment against excessive temperature rise, etc. must be installed, as
malfunction of this product could result in serious damage to the system or injury to personnel. Also proper periodic
maintenance is required.
• This instrument must be used under the conditions and environment described in this manual. Shinko Technos Co., Ltd.
does not accept liability for any injury, loss of life or damage occurring due to the instrument being used under
conditions not otherwise stated in this manual.
Caution with respect to Export Trade Control Ordinance
To avoid this instrument from being used as a component in, or as being utilized in the manufacture of weapons of
mass destruction (i.e. military applications, military equipment, etc.), please investigate the end users and the final use
of this instrument. In the case of resale, ensure that this instrument is not illegally exported.
Warning
• To prevent an electric shock or fire, only Shinko or other qualified service personnel may handle the inner assembly.
• To prevent an electric shock, fire or damage to the instrument, parts replacement may only be undertaken by
Shinko or other qualified service personnel.
Caution
• This instrument should be used according to the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause a fire.
• Be sure to follow the warnings, cautions and notices. Not doing so could cause serious injury or malfunction.
• Specifications of the JCS-33A and the contents of this instruction manual are subject to change without notice.
• This instrument is designed to be installed through a control panel. If it is not, measures must be taken to ensure
that the operator cannot touch power terminals or other high voltage sections.
• Be sure to turn the power supply to the instrument OFF before cleaning this instrument.
• Use a soft, dry cloth when cleaning the instrument. (Alcohol based substances may tarnish or deface the unit.)
• As the display section is vulnerable, do not strike or scratch it with a hard object.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• Shinko Technos CO., LTD. is not liable for any damage or secondary damage(s) incurred as a result of using
this product, including any indirect damage.
1. Model
1.1 Model
Series name: JCS-33A (W48 x H48 x D95mm)
Alarm type can be selected by keypad. *1
Non-contact voltage (for SSR drive): 12
+2
0
V DC
100 to 240V AC (standard)
Heating/Cooling control,
Control output (OUT2)
Serial communication (RS-485)
SV1/SV2 external selection
*1: Alarm types (9 types and No alarm action) and Energized/Deenergized can be selected by keypad.
*2: Thermocouple, RTD, DC current, and DC voltage can be selected by keypad.
*3: Supply voltage 100 to 240V AC is standard. When ordering 24V AC/DC, enter “1” after the input code.
To Next Page
Need help?
General
