S
Steven MorganJul 26, 2025
What to do if ShoreTel 485g IP Phone displays 'No Service'?
- JJames ThomasJul 26, 2025
If your ShoreTel IP Phone displays 'No Service', it means your phone is temporarily inoperable. Contact your system administrator.
To Next PageTo Next PageWhat to do if ShoreTel 485g IP Phone displays 'No Service'?
If your ShoreTel IP Phone displays 'No Service', it means your phone is temporarily inoperable. Contact your system administrator.
What to do if ShoreTel 485g displays 'Service unavailable at this time'?
If your ShoreTel IP Phone displays 'Service unavailable at this time' when dialing, it means the phone is out of service. This can be due to a switch issue or an administrator putting it out of service. While in this state, you can access visual voicemail, Directory, and History, but you cannot make calls.
Why ShoreTel IP Phone says mailbox is full?
If callers are notified that your ShoreTel IP Phone mailbox is full, it means your mailbox has exceeded its limit. To resolve this, you must delete messages you no longer need.
How to fix a blank display on ShoreTel 485g IP Phone?
If your ShoreTel IP Phone display is blank: * Your phone might be in power-saving mode. Try going off hook or pressing any key to bring the screen back to full brightness. * The phone might not be connected to a working power source. In this case, contact your system administrator.
How to troubleshoot no dial tone on ShoreTel 485g handset?
If you hear no dial tone when you take the handset off hook on your ShoreTel IP Phone, but you hear a dial tone when using the speaker or a headset, the handset cable might not be properly connected. Ensure the handset cable is firmly plugged into both the phone base and the handset. Unplug and reconnect the cable at both points, clicking the jack firmly into place, then take the handset off hook and listen for a dial tone.
What to do if ShoreTel IP Phone display is blank?
If your ShoreTel IP Phone display is blank, it could be in power-saving mode. To resolve this, either go off hook or press any key to restore the screen to full brightness. If this does not work, the phone may not be properly connected to a power source. In this case, contact your system administrator for assistance.
General
