Shortridge Instruments ADM-860C User Manual

ADM-860C 04/14/0811
ABS PRES
This signal will be flashed when the absolute pressure mode is selected, and also each time the READ key
is pressed when in the absolute pressure mode.
ADM-860C
This message is flashed following
$ $ $ $ $ $ $ $
when the meter is first turned on.
AIRFOIL
This signal will be flashed when the AirFoil probe mode is selected and also upon each subsequent operation
of the READ key.
AUTO ZERO
When the meter is first turned ON, it will perform a self-calibration process that takes a few seconds. The
display will read AUTO ZERO during this period and the operating controls will be inhibited. No READ
operations or function changes may be made during the AUTO ZERO period. The meter will also perform
a brief self-calibration cycle periodically throughout normal operation.
BATT 1/3
This message may be displayed following SHIFT/SHIFT and indicates that about one-third of the useful
charge remains in the batteries.
BATT 2/3
This message may be displayed following SHIFT/SHIFT and indicates that about two-thirds of the useful
charge remains in the batteries.
BATT FULL
This message is displayed following SHIFT/SHIFT when the batteries are fully charged.
BATTERY
This message may be displayed as part of a longer message sequence such as NO LIGHT/BATTERY/TOO
LOW.
CF: CORR
This message indicates that the air flow measurement being performed is in cfm and will be backpressure
compensated.
CF: UNCORR
This message indicates that the air flow measurement being performed is in cfm and will not be backpressure
compensated.
CHANGE
This message indicates that a connection to the meter, such as the TemProbe, has been altered. CHANGE
may be preceded by the display of the connection type.
CLEAR
This message is displayed when the operator has pressed SHIFT/CLEAR and no readings are in memory.
CLEAR MEM
This signal is flashed as the STORE functions are cleared.
DIFF PRES
This signal will be flashed when the differential pressure mode is selected, and also upon each subsequent
operation of the READ key.

Shortridge Instruments ADM-860C Specifications

General

Brand	Shortridge Instruments
Model	ADM-860C
Category	Measuring Instruments
Language	English