ADM-860C 04/14/0810
xx n.nnnn
This display indicates that the battery charge is nearly depleted. xx indicates the units for the reading. The
meter will display LOCHARGE prior to displaying this symbol.
xx
› n.nnnn
This display indicates that the battery is highly charged. xx indicates the units for the reading. The area of
the battery symbol that is dark will decrease incrementally as the battery charge declines.
xx
6 n.nnnn
This display indicates that the meter is in TREND mode and that the readings are remaining relatively
constant . xx indicates the units for the reading.
xx
_ n.nnnn
This display indicates that the meter is in TREND mode and that the readings are increasing slowly. xx
indicates the units for the reading.
xx
8 n.nnnn
This display indicates that the meter is in TREND mode and that the readings are increasing rapidly. xx
indicates the units for the reading.
xx
` n.nnnn
This display indicates that the meter is in TREND mode and that the readings are decreasing slowly. xx
indicates the units for the reading.
xx
9 n.nnnn
This display indicates that the meter is in TREND mode and that the readings are decreasing rapidly. xx
indicates the units for the reading.
xx
¸
n.nnnn
Displays the maximum (greatest value) reading stored in memory during a STORE sequence. Displayed
when the STORE key is pressed four times after HALT during the STORE sequence. Number of decimal
places will vary.
xx
º n.nnnn
Displays the minimum (least value) reading stored in memory during a STORE sequence. Displayed when
the STORE key is pressed three times after HALT during the STORE sequence. Number of decimal places
will vary.
xx
ºc nnnn
Displays the minimum reading of just the backpressure compensated readings stored in memory during a
STORE sequence. Displayed when the STORE key is pressed three times after HALT during the STORE
sequence.
xx
¸
c nnnn
Displays the maximum reading of just the backpressure compensated readings stored in memory during a
STORE sequence. Displayed when the STORE key is pressed three times after HALT during the STORE
sequence.
xx
ºu nnnn
Displays the minimum reading of just the nonbackpressure compensated readings stored in memory during
a STORE sequence. Displayed when the STORE key is pressed three times after HALT during the STORE
sequence.
xx
¸
u nnnn
Displays the maximum reading of just the nonbackpressure compensated readings stored in memory during
a STORE sequence. Displayed when the STORE key is pressed three times after HALT during the STORE
sequence.
To Next Page
Loading...
Need help?
General
