SHOWTEC Showdesigner 1024 - Setup of Slope Channels; Delete

15
2.12 Setup of slope channels
The channels that have been assigned to the jog wheels will automatically have a slope assigned when
the chase is running. Other channels can be set up with a slope also.
Step
Description
1
Press program to enter programming mode.
2
Press SlopeSet
3
Select the desired fixture.
4
Push the channels you want to setup with slope until the LED indicators of the faders
are lit. Press Release and move the fader to release the selected channel.
5
Press SlopeSet again. Now setup is finished. The channels will have a slope when
running.
Example:
To assign a slope to channel 5 & 6 of fixture 1:
Press Program -> SlopeSet -> Select Fixture 1 -> move the faders of CH5 & CH6 until the LED indicators are
lit. -> SlopeSet. Ok.
2.13 Delete
Step
Description
1
Press Del.
2
Select the item you want to delete from: SC1, SC2, SC3, Chase1, Chase2, Chase3,
Group1, <=/SETX or SlopeSet.
3
Select the number buttons from 1--16 for deleting. ( not for <=/SETX, =>/SETY or
SlopeSet )
4
Item is deleted.
Example: Delete the chase stored in number button 2 of Chase 1.
Press Del -> Chase1 -> 2. Ok.