Shure AD4Q User Manual

2 Tip
1
Ring
3
Frequency Bands and Transmitter RF Power
RF Power (mW)***Frequency Range (MHz)Band
2/10/35470 to 510G53
2/10/20
479 to 565
G54
2/10/35
470 to 636*
G55†
2/10/35
470 to 636
G56
2/10/35
470 to 616*
G57
2/10/35
510 to 530
G62
2/10/35
520 to 636
H54
2/10/35
606 to 698*
K53
2/10/35
606 to 663**
K54
2/10/35
606 to 694
K55
2/10/35
606 to 714
K56
2/10/35
606 to 790
K57
2/10/35
622 to 698
K58
2/10/35
630 to 787
L54
2/10/35
794 to 806
R52
2/10
806 to 810
JB
2/10
925 to 937.5
X51
2/10/35
941 to 960
X55
Note: *with a gap between 608 to 614 MHz.
Note: **with a gap between 608 to 614 MHz and a gap between 616 to 653 MHz.
Note: ***power delivered to the antenna port.
Note: †operation mode varies according to region. In Brazil, High Density mode is used.
Shure IncorporatedAD4Q Digital Quad Receiver
21/21
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com

Shure AD4Q Specifications

General

Latency	2.9 ms
Number of Channels	4
Audio Frequency Response	20 Hz to 20 kHz
RF Sensitivity	-98 dBm at 10-5 BER
Power Requirements	100 to 240 V AC, 50–60 Hz
Type	Digital Quad-Channel Wireless Receiver
Modulation	Shure proprietary digital
Spurious Rejection	> 80 dB
Image Rejection	> 80 dB
Audio Output	XLR
Network Interface	Ethernet 10/100 Mbps
Operating Temperature Range	-18°C (0°F) to +50°C (122°F)
Dynamic Range	120 dB (A-weighted)