Shure BLX - Transmitter Setup

Shure Incorporated
4/23
31
2
4
Install batteries and turn on transmitter.
On the transmitter, set the group and channel to match the receiver. The audio LED on the receiver should
illuminate.
If setting up additional systems, leave the first transmitter and receiver on. For each additional receiver,
manuallysetthegrouptomatchthefirstreceiver.Note:Thereceiverwillautomaticallyperformachannelscan
to find an available frequency after the group has been selected. Set the transmitter frequency to match the
receiver.
If sound is too faint or distorted, adjust the gain accordingly.