Shure BLX2 User Manual

2
BLX2
① LED Indicator
Displays power and battery status (see table).
② power Button
Push to turn power on or off.
③ group Button
Changes group setting.
④ channel Button
Changes channel and gain setting.
⑤ LED Display
Displays group and channel setting.
⑥ Identification Cap
⑦ Battery Compartment
① AC Adapter Jack
② Adapter Cord Tie-Off
③ XLR microphone output jack MIC out
④ 6.35 mm (1/4") instrument level output jack
instrument out
Note: XLR and 1/4" connectors can be used simultane-
ously. Refer to the output information in Specifications.
BLX1
① LED Indicator
Displays power and battery status (see table).
② power Switch
Toggles power on or off.
③ Audio Gain Adjustment
Gain thumb wheel—located on the inside of
bodypack door.
④ 4-Pin Microphone Input Jack (TA4
connector)
⑤ group Button
Changes group setting.
⑥ channel Button
Changes channel setting.
⑦ LED Display
Displays group and channel setting.
⑧ Antenna
⑨ Battery Compartment
Back Panel
BLX4
BLX88
BLX1
BLX2
channel
group
-10 dB
group
(A-Y)
channel
(0-9)
①
②
④
⑤
⑥
⑦
⑧
⑨
③
③
④
⑥
⑦
⑤
①
②
POWER
MIC OUT
INSTRUMENT OUT
12-18 V
160 mA
①
②
③
④
①
②
③ ③
④
④
POWER
MIC OUT
INSTRUMENT OUT
12-18 V
160 mA
INSTRUMENT OUT
MIC OUT

Shure BLX2 Specifications

General

Battery Life	Up to 14 hours
Battery Type	2 AA batteries
Modulation	FM
Transmitter Type	Handheld
Compatibility	BLX Series
Frequency Response	50 Hz to 15 kHz
Operating Range	300 ft (91 m) typical
Microphone Capsule	SM58
RF Output Power	10mW
Dynamic Range	100 dB