Shure BLX2 User Manual

Shure Incorporated
4/28
•
•
•
•
•
•
•
•
•
•
1. 1.
2.
2.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accom
panying this unit.
WARNING: Danger of explosion if incorrect battery replaced. Operate only with AA batteries.
System Components
Note: Your system comes with a combination of the following components.
BLX1 Bodypack Transmitter
BLX2 Handheld Transmitter (choice of SM58, BETA58A, or PG58)
BLX4 Wireless Receiver
BLX88 Dual Wireless Receiver
PS24 Power Supply
Lavalier microphone (choice of PG185, WL185 or WL93)
Headworn microphone (choice of PG30, SM31FH or SM35)
MX153 Earset microphone
Instrument microphone (BETA98H/C)
Guitar cable (WA302)
Quick Start Guide
Connect receiver to power source.
Connect receiver to mixer or amplifier. Hold power button to turn on.
Press group button on receiver to perform a group scan.

Shure BLX2 Specifications

General

Battery Life	Up to 14 hours
Battery Type	2 AA batteries
Modulation	FM
Transmitter Type	Handheld
Compatibility	BLX Series
Frequency Response	50 Hz to 15 kHz
Operating Range	300 ft (91 m) typical
Microphone Capsule	SM58
RF Output Power	10mW
Dynamic Range	100 dB