Shure BLX2 - User Manual

28 pages

To Next Page

To Next Page

Loading...

BLX

Wireless System

Online user guide for Shure BLX wireless system.

Version: 4 (2019-H)

Table of Contents

Other manuals for Shure BLX2

User Manual15 pages

User Guide25 pages

Quick Start Guide25 pages

Questions and Answers

J
Joshua RodriguezSep 8, 2025
What to do if Shure BLX2 has audio artifacts or dropouts?
- V
  Virginia SextonSep 8, 2025
  To address audio artifacts or dropouts in your Shure Microphone system, try the following: * Change the receiver and transmitter to a different group or channel. * Identify and remove any nearby sources of RF interference. * Replace the transmitter batteries. * Make sure the receiver and transmitter are correctly positioned within the system's specified parameters. * Ensure the system is set up within the recommended range and keep the receiver away from metallic surfaces. * For optimal sound, the transmitter should be used in line of sight from the receiver.
M
mcraigSep 7, 2025
What to do if the receiver LED screen is off on my Shure BLX2 Microphone system?
- S
  Samantha SmithSep 7, 2025
  If the receiver LED screen is off on your Shure Microphone system, make sure the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
R
Randy HodgesAug 22, 2025
What to do if my Shure Microphone system has no sound?
- C
  Charles BrownAug 22, 2025
  If your Shure Microphone system produces no sound or only a faint sound, try the following: First, ensure the transmitter is turned on. Second, check that the batteries are correctly installed. Third, perform the transmitter setup. Finally, insert fresh batteries.
T
Timothy SavageSep 4, 2025
Why does my Shure Microphone system have no sound or faint sound?
- B
  brandon07Sep 4, 2025
  If your Shure Microphone system has no sound or faint sound, check the following: If the receiver ready LED is on, verify all sound system connections or adjust gain as needed. If the receiver ready LED is off, turn on the transmitter. Also, ensure the batteries are installed correctly and are fresh. Finally, perform transmitter setup.
X
xcooperSep 3, 2025
How to fix sound level variations in Shure BLX2?
- F
  fmartinezSep 3, 2025
  To address sound level variations in your Shure Microphone system, adjust the transmitter gain as necessary.
A
Amy WaltersSep 2, 2025
Why is there distortion in my Shure BLX2?
- C
  Christie HartmanSep 2, 2025
  Distortion in your Shure Microphone system may occur if the audio LED on the receiver indicates overload (red). Reduce the transmitter gain to resolve this issue.
V
Vincent LewisAug 31, 2025
What does it mean when the transmitter indicator LED is flashing red on my Shure BLX2?
- A
  Alejandro McphersonAug 31, 2025
  If the transmitter indicator LED is flashing red on your Shure Microphone system, replace the transmitter batteries.
P
Paula MirandaAug 30, 2025
Why does my Shure BLX2 Microphone system have audio artifacts or dropouts?
- L
  Leonard SandersAug 30, 2025
  Audio artifacts or dropouts in your Shure Microphone system can occur if the ready LED is flickering or off. To resolve this: 1. Change the receiver and transmitter to a different group and/or channel. 2. Identify and remove nearby sources of RF interference. 3. Replace the transmitter batteries. 4. Ensure the receiver and transmitter are within system parameters. 5. Set up the system within the recommended range and keep the receiver away from metallic surfaces. 6. Ensure the transmitter is used in line of sight from the receiver for optimal sound.
B
benjaminhutchinsonAug 29, 2025
Why is the LED screen off on my Shure BLX2 Microphone system receiver?
- J
  James RaymondAug 29, 2025
  If the LED screen is off on your Shure Microphone system receiver, ensure that the DC adapter is securely plugged into the electrical outlet and that the receiver is powered on.
A
Ashley CarlsonAug 27, 2025
What to do if Shure BLX2 sound levels vary between sources?
- J
  Jose BeckAug 27, 2025
  If you experience sound level variations when switching to different sources with your Shure Microphone system, adjust the transmitter gain as necessary.

Shure BLX2 Specifications

General

Battery Life	Up to 14 hours
Battery Type	2 AA batteries
Modulation	FM
Transmitter Type	Handheld
Compatibility	BLX Series
Frequency Response	50 Hz to 15 kHz
Operating Range	300 ft (91 m) typical
Microphone Capsule	SM58
RF Output Power	10mW
Dynamic Range	100 dB

Summary

Important Safety Instructions

System Overview

System Components

Lists the various components that make up the Shure BLX wireless system.

Quick Start Guide

Provides initial setup steps to get the wireless system operational quickly.

Features and Components

Front Panel

Overview of the front panel controls and indicators for BLX4 and BLX88 receivers.

Back Panel

Details the rear panel connections and ports for BLX4 and BLX88 receivers.

BLX1 Transmitter Details

Information and indicators specific to the BLX1 bodypack transmitter.

BLX2 Transmitter Details

Information and indicators specific to the BLX2 handheld transmitter.

Transmitter LED Indicators

Explains the meaning of LED status lights on the transmitters.

System Setup Procedures

Single System Set Up

Step-by-step guide for setting up a single wireless system.

Setting Transmitter Group and Channel

Instructions for manually setting the transmitter's group and channel to match the receiver.

Multiple System Setup

Guide for setting up multiple wireless systems simultaneously to avoid interference.

Receiver and Control Management

Manually Setting Receiver Group and Channel

Steps to manually change the receiver's group and channel settings.

Locking and Unlocking Controls

How to lock and unlock the controls on the transmitter and receiver.

Tips to Improve Wireless System Performance

Optimizing Audio Performance

Getting Good Sound

Tips and techniques for achieving optimal audio performance with the wireless system.

Correct Microphone Placement

Guidance on optimal microphone positioning for clear audio capture and to avoid plosives.

Wearing the Headworn Microphone

Instructions for positioning headworn microphones correctly for consistent sound.

Adjusting Transmitter Gain

Transmitter Battery Management

Batteries

Information on battery life, replacement, and indicators for the BLX2 handheld transmitter.

Bodypack Transmitter Usage

Wearing the Bodypack Transmitter

Instructions on how to clip and wear the BLX1 bodypack transmitter for optimal performance.

System Operations and Maintenance

Power Off

Procedures for powering down the BLX2, BLX4/88, and BLX1 transmitters.

Removing and Installing Identification Caps

Guide on how to attach and remove identification caps on the BLX2.

Troubleshooting Guide

Technical Specifications

System

Provides technical specifications for the overall Shure BLX wireless system.

BLX1

Lists detailed technical specifications for the BLX1 bodypack transmitter.

BLX4 & BLX88

Lists detailed technical specifications for the BLX4 and BLX88 receivers.

Certifications and Compliance

Important Product Information

Licensing Information

Details regarding licensing requirements for operating wireless microphone equipment.

Information to the user

FCC compliance information and user guidelines for device operation.

Canada Warning for Wireless

Warnings and compliance information specific to wireless device usage in Canada.

Regional Wireless Regulations

Australia Warning for Wireless

Specific warnings and conditions for wireless device operation in Australia.

Frequency Range and Transmitter Output Level

Tables detailing frequency bands and their corresponding transmitter output power levels.

Frequencies for European Countries

Related product manuals

Preview: Shure BLX

Preview: Shure BLX1

Preview: Shure BLX88

Preview: Shure BLX4R

Preview: Shure BLX4R T11

Shure BLX4R T11

Preview: Shure BLX Series

Shure BLX Series

Preview: Shure BLX288/B58

Shure BLX288/B58

Shure BLX188CVLM17

Shure BLX1288/P31-H9

Preview: Shure BLX24R/SM58-H10

Shure BLX24R/SM58-H10

Preview: Shure BLX Wireless System

Shure BLX Wireless System