Shure GLXD14 - Transmitter Battery Charging Options; Receiver Charging Bay Usage; Charging from AC Power Source; Charging from a USB Port

Shure Incorporated
13/32
1.
2.
1.
2.
1.
2.
Note: The transmitter will not pass RF or audio signals when connected to the charging cable.
The following battery charging options are available:
Receiver Charging Bay
The GLXD4 receiver has a built-in charging bay for the transmitter batteries.
Insert the battery into the charging bay.
Monitor the battery charging indicator on the front panel until charging is complete.
Charging from an AC Power Source
Plug the charging cable into the charging port on the transmitter.
Plug the charging cable into an AC power source.
Charging from a USB Port
Plug the USB charging cable into the charging port on the transmitter.
Plug the cable into a standard USB port.