To Next Page
M
Mark MejiaAug 25, 2025
Why won't my Shure Receiver gain control adjust?
- SShannon WilliamsAug 25, 2025
If the receiver gain control on your Shure device cannot be adjusted, check the transmitter. The transmitter must be on to enable gain changes.
Why won't my Shure Receiver gain control adjust?
If the receiver gain control on your Shure device cannot be adjusted, check the transmitter. The transmitter must be on to enable gain changes.
What to do if the receiver gain control cannot be adjusted on my Shure Receiver?
If the receiver gain control cannot be adjusted, check the transmitter. The transmitter must be on to enable gain changes.
General| Impedance | 50 Ω |
|---|---|
| Antenna type | Removable |
| Display type | LCD |
| Mounting type | Rack mount |
| Product color | Black |
| Scan features | Channel scan, Group scan |
| LED indicators | Yes |
| Housing material | Metal |
| Antennas quantity | 2 |
| Channels quantity | 11 channels |
| High density mode | No |
| Antenna connector type | SMA |
| Operating frequency type | Ultra High Frequency (UHF) |
| Radio Frequency (RF) range | 2404 - 2478 MHz |
| Operating temperature (T-T) | -18 - 57 °C |
| Microphone frequency response | 20 - 20000 Hz |
| Total Harmonic Distortion (THD) | 0.2 % |
| Input voltage | 14 - 18 V |
| Power supply type | AC |
| Battery life (max) | 16 h |
| Current consumption | 550 mA |
| XLR out | 1 |
Weight and Dimensions| Depth | 163 mm |
|---|---|
| Width | 197 mm |
| Height | 42 mm |
| Weight | 907 g |
Explains symbols and provides critical safety warnings for operation.
Explains the RF Status LED and Link Button functions.
Describes the Group and Channel buttons for system setup.
Details the receiver's LCD screen and how to use the gain adjustment buttons.
Offers practical advice for optimizing wireless signal reception and placement.
Step-by-step process for setting up and linking receivers and transmitters.
Procedures for manually linking transmitters and setting up combo systems.
How to adjust the audio gain for optimal signal levels.
How to lock/unlock receiver and transmitter controls to prevent accidental changes.
Procedures for manually assigning groups and channels instead of auto-scan.
Guides users on installing the receiver in a standard 19-inch equipment rack.
Diagnoses and resolves problems related to audio signal absence or low level.
Solutions for audio dropouts, distortion, and unsuccessful transmitter/receiver links.
Step-by-step guides to reset the receiver or transmitter to factory settings.
