EasyManuals Logo

Shure MV5 User Manual

Shure MV5
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Shure Incorporated
9/15
Sampling Rate and Bit Depth
Sample Rate and Bit Depth settings are found in a drop down menu in the audio or sound control panel of your computer. You
can adjust these variables to fit your needs. Select a lower sample rate for podcast recording, when it is important to have a
smaller file for easy download. Select a higher sample rate for music and more dynamic recordings.
Tip: Record at a higher sample rate and bounce down to an M4A for a file with the highest sound quality at a manageable size.
Tip for PC users: Make sure that the sample rate and bit depth microphone settings, found in the sound control panel of the
computer, match with the sample rate and bit depth selected in your software.
Troubleshooting
Issue Solution
The display does not illumi
nate
Make sure that the MV5 is fully plugged in.
Audio is too low
Check the computer sound control panel settings. When first connecting the MV5 to your
computer, make sure to raise the computer volume level.
Audio sounds bad
Check the sound control panel of the computer to ensure that the MV5 is fully plugged in
and recognized.
Audio is distorted
Use the audio meter to ensure that volume peaks are within the target range. If level is
reaching the red peak indicator of the input meter, turn the gain down.
Audio sounds unnatural or
jittery
Make sure that the sample rate and bit depth microphone settings, found in the sound
control panel of the computer, are consistent with the sample rate and bit depth selected
in your software.
MV5 is plugged in, but the
volume meter does not regis
ter a signal.
Edit the privacy setting for the iOS device under SETTINGS > PRIVACY > MICROPHONE
to give the recording application permission to use the microphone.
Device not working with USB
hub.
The MV5 requires 250 mA per port. Check USB hub documentation for current/port speci
fication.
System Requirements and Compatibility
Windows
Windows 7 and higher
Minimum RAM = 64 MB
USB 2.0
Macintosh
OS X Lion 10.7 and higher
Minimum RAM = 64 MB
USB 2.0

Other manuals for Shure MV5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shure MV5 and is the answer not in the manual?

Shure MV5 Specifications

General IconGeneral
Transducer TypeCondenser
Polar PatternCardioid
Frequency Response20 Hz to 20 kHz
Sensitivity-40 dBFS/Pa at 1 kHz
Maximum SPL130 dB SPL
ConnectivityUSB
Adjustable Gain Range0 to +36 dB
Connector TypeMicro-USB
Sampling Rate44.1 kHz/48 kHz
Power RequirementsPowered by USB
Headphone Output3.5 mm
CompatibilityiOS, Android, Mac, PC

Related product manuals