Shure Incorporated
10/18
•
•
Monitor Mix Blend
Use the monitor mix slider to adjust how much of each source you can hear. For best results, start monitoring at the midpoint
and adjust.
Move the slider towards the microphone icon (Mic) to hear more of the audio going into the mic. Like when you're singing
over a recorded guitar track and want to clearly hear your voice.
Move the slider towards the device icon (Playback)tohearmoreofthetrackplayingback.Whenyou'rerecordingahar-
mony to your original vocal track and want to clearly hear the original performance.
EQ Modes
Use the equalizer to boost or cut bands of frequencies to improve sound clarity. Tap Flat to return to an unchanged equalisation
state.
Mode Characteristics
Flat
A completely unprocessed signal (no equalization settings used).
High-
pass
High-pass filter to reduce proximity effect.
Presence
boost
Equalization that emphasizes clarity and fullness.
High-
pass
presence
boost
Combination high-pass filter and presence boost to improve definition and focus on clarity
To Next Page
Loading...
