Shure MV7 - iOS System Requirements; Android System Requirements; MV7 Product Specifications; Technical Specifications

Shure Incorporated
13/18
•
•
•
•
•
•
•
•
•
64 bit
Minimum 2 GB of RAM
Minimum 500 MB of hard disk space
System Requirements and Compatibility: iOS
iOS: iOS 14 and higher
iPhone: iPhone 6s and higher
iPod Touch: 7th gen
Note: iPad Pro (USB-C) is not supported.
System Requirements and Compatibility: Android
Will work with any Android device that has:
Android Pie 9.0 and higher
USBHostPowerRequirementof≥100mA
USB Audio Class 1.1 support and higher
Android is a trademark of Google Inc.
Note: See https://www.shure.com/MOTIVcompatibility for information on supportive Android devices.
Specifications
MFi Certified
Yes
DSP Modes (Presets)
Near/Far, Dark/Natural/Bright
Transducer Type
Dynamic (moving coil)
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
314Ω
Frequency Response
50Hzto16,000Hz
Adjustable Gain Range
0to+36dB
Sensitivity
(@ 1 kHz, open circuit voltage)
-55dBV/Pa[1](1.78mV),-47dBFS/Pa[1][2]