Shure SCM262 - Common Mode Rejection; Polarity; Overload and Shorting Protection; Equalization Specifications

channel controls full counterclockwise, A-Weighted
Master full counterclockwise
-95dBV
Master full clockwise
-59dBV
Common Mode Rejection
>70dB, at 1 kHz
Polarity
All inputs to all outputs are non-inverting.
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage.Microphone inputs are not damaged by signals
up to +10 dBV; Line and Aux inputs by signals up to +28 dBV
Equalization
Bass (Low-frequency shelving, corner frequency at 250 Hz)
±6dB
Treble (High-frequency shelving, corner frequency at 4 kHz)
±6dB
Ducking
Mic channels 1 and 2 levels
-20dB or -∞dB
Activation time
10ms, typical
Mic Deactivation time
2 seconds, typical
Jukebox Mute Deactivation Time
30 seconds, typical
Phantom Power
12 Vdc open-circuit through 680 Ω resistors
Operating Voltage

Publications