Shure SCM262 User Manual

Internal Modifications
Internal Modifications
Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing and
modifications to qualified service personnel.
Disassembly
To access the printed circuit board (pc board) for internal modifications, use the following steps:
1. Unplug the power cord.
2. Remove the knobs and retainer nuts from the front panel.
3. Remove the two screws at each bottom corner of the front panel.
4. Remove the four screws at each corner of the back panel.

Publications

Shure SCM262 Specifications

General

Channels quantity	2 channels
Digital sound processing	- bit
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Microphone in	Yes
Line inputs (RCA)	3
Number of microphone inputs	2
Microphone input impedance	1400 Ω
Total Harmonic Distortion (THD)	0.25 %
Type	Stereo Microphone Mixer
DJ mixer	-
Product color	Black, Grey
Rack capacity	0.5U

Weight and Dimensions

Depth	162 mm
Width	218 mm
Height	43 mm
Weight	1100 g