①
MIC Channel Gain Controls, 1-2.
Control the gain levels of the MIC channels and LINE IN 2 (MIC 2).
②
STEREO Channel Gain Controls, 1-3.
Control the gain levels from CD players, juke boxes, VCRs, or other consumer stereo equipment connected to
the STEREO inputs.
③
BASS and TREBLE Controls.
Control the boost/cut of the low- and high-frequency of the shelving filters.
④
MASTER Gain Control.
Allows adjustment of the overall output gain.
⑤
POWER Indicator.
Lights up to indicate when the unit is plugged in and receiving power.
The SCM262 does not have a power switch. To turn the unit off, unplug the power cord or use an external power strip with
a switch. However, it can remain plugged in as it uses very little power when idle.
⑥
POWER Switch.
Country dependent.
Rear Panel
①
Power Connector.
Accepts 100-120 Vac (SCM262) or 220-240 Vac (SCM262E).
Publications
To Next Page
Loading...
