Shure V-15 Type III User Manual

V-15 Tgpe 111
and V-15 111-G
The Shure V-15 Type Ill clearly defines the outer limits of the state
of the art in phono cartridge design.
It
is a worthy successor to the world-acclaimed V-15 Type II Im-
proved, and is designed to function in a milieu where rapidly multi-
plying developments in recording techniques and rapid advances in
playback equipment are making ever-increasing demands on the
capabilities of the phono cartridge. The
V-15 Type Ill was developed
to satisfy the "critical ear" of the audiophile of the Seventies.
This booklet was prepared to tell you the complete story of its de-
velopment.
A few minutes spent with it will enhance your enjoyment
of this remarkable new cartridge.

Shure V-15 Type III Specifications

General

Type	Phono Cartridge
Category	Accessories
Frequency Response	20 Hz - 20 kHz
Stylus Type	Elliptical
Mount	Standard 1/2 inch
Channel Separation	25 dB at 1 kHz
Load Impedance	47 kΩ
Compliance	25 x 10-6 cm/dyne
Channel Balance	2 dB
Output Voltage	3.5 mV
Recommended Load Capacitance	400 to 500 pF