С К В А Ж И Н А 4 3 2 1 0 4
К У С Т 5 2 8 1 4
М Е С Т О Р . 0 0 3
Я Р К О С Т Ь И Н Д. 5 0 %
1. Well number – 432104,
2. Cluster number – 52814,
3. Field number 003.
4. Display brightness – 50%.
3. Type of survey. Automatic valve. The period of impulse.
This mode makes it possible to indicate and choose the type of
survey. In the tool the following conditional abbreviations of the types of
survey are taken:
- (measuring or detection) of static level (STAT.)
- determination of dynamic level (DYN.)
- recording of the curve of the level build-up (KVU)
- recording of the curve of the level decreasing (KPU)
- automatic registration of the gas pressure (KVD)
In order to choose the type of survey press «INPUT/OUTPUT»
button consecutively. The example demonstrates the determination of
dynamic level; automatic valve operation is not allowed.
В И Д И С С Л Е Д . Д И Н
4. Period and number of measurements (mode is active only for the
automatic pressure logging test type). The "DURATION" line
specifies the duration (in seconds) of the acoustic impulse. In the
window of the type of survey the time interval (in minutes) for
automatic annulus pressure recording is displayed and set. Possible
options are: 1, 2, 3, 4, 5, 7, 10, 15, 20, 30, 40, 60, 90, 120, 180, 240,
To Next Page
Loading...